{"id":331,"date":"2025-04-02T05:15:12","date_gmt":"2025-04-02T05:15:12","guid":{"rendered":"https:\/\/npiecommms-g3dmgha8bfdze9hu.australiaeast-01.azurewebsites.net\/clarktanks\/?post_type=docs&p=331"},"modified":"2025-04-02T05:15:21","modified_gmt":"2025-04-02T05:15:21","password":"","slug":"using-a-dry-system-to-connect-pipework-to-your-rainwater-tank","status":"publish","type":"docs","link":"https:\/\/npiecommms-g3dmgha8bfdze9hu.australiaeast-01.azurewebsites.net\/clarktanks\/docs\/using-a-dry-system-to-connect-pipework-to-your-rainwater-tank\/","title":{"rendered":"Using a Dry System to Connect Pipework to Your Rainwater Tank"},"content":{"rendered":"\n

Installing a rainwater tank would be pointless if it wasn\u2019t connected via pipes to your roof capture area. To harvest rainwater then, you need to connect a pipework to a downpipe from your gutter to your tank that water can flow through.<\/p>\n\n\n\n

These pipework systems come in two forms: 1) \u201cDry System\u201d and\u00a02) \u201cWet System\u201d. This article will explain what a\u00a0Dry System<\/strong>\u00a0is and when it is a suitable option for your property. You will need to decide, perhaps with your builder or tank installer, which suits your situation best.<\/p>\n\n\n\n

What is a Dry System?<\/h2>\n\n\n\n

Dry Systems refer to when your pipework connects your roof water directly to the top of your water tank \u2013 from your gutters to your tank inlet. During a rain event, rainwater enters in your pipework, and gravity ensures water flows down through the downpipes (or multiple downpipes) and into your tank.<\/p>\n\n\n\n

Dry System Benefits<\/h2>\n\n\n\n

Dry Systems are a quick and easy type of installation including accessories such as water diverters which assist with water quality, and simpler to maintain.<\/p>\n\n\n\n

A Dry System works best where your water tank is positioned close to the downpipe it will be receiving water from. If your water tank is further away the pipework can look messy since the pipes would be visible running alongside your house or building, through the air, in perhaps zig-zag fashion to the top of your tank.<\/p>\n\n\n\n

Dry System\u00a0water diverters\u00a0can be placed in two main positions:<\/p>\n\n\n\n

    \n
  1. near the downpipe<\/strong>\u00a0before the pipework to the tank<\/li>\n\n\n\n
  2. near the tank inlet<\/strong>\u00a0with the main pipework leading into the diverters before a single pipe feeds directly into the tank.<\/li>\n<\/ol>\n\n\n\n

    Water diverters are usually found in the form of a downpipe with slow-release valve at the bottom exists in the pipework somewhere between your gutter downpipe and tank. As rainwater flows through your pipework, the water diverter fills up with the initial rainwater runoff that often contains debris and small particles. The amount of water diverted depends on your roof size and how polluted your roof may be \u2013 generally a minimum of 20L per 100m2<\/sup>. When full, a floating ball valve seals the top, keeping the debris trapped in the diverter and allowing fresher rainwater to flow on into your tank.<\/p>\n\n\n\n

    Maintaining a Dry System is simpler than\u00a0Wet Systems\u00a0since being above ground the pipework is more easily accessible. Should a leak develop, it will be more quickly noticeable.<\/p>\n\n\n\n

    Finally, the reason why this system is referred to as \u201cdry\u201d is because unlike\u00a0Wet Systems\u00a0no water remains in the pipework after rain has stopped falling. This means less chance of contaminant build-up, which helps improve water quality and the life of your\u00a0water pumps.<\/p>\n\n\n\n

    When to Use a Dry System<\/h2>\n\n\n\n

    You will generally want to use a dry system for pipework when:<\/p>\n\n\n\n